Do you want to clean the Crystals like a Professional?

Are you looking for the best services in terms of home cleaners, and then you must hire the Connect Cleaners!

Standard with bar

Both the vertical and the horizontal systems will be used, taking into account that we will have to put more pressure on the glass since when the accessories are inserted in the bar, the pressure on the same is reduced. So that the horizontal system is not slow, since in each pass we will have to lower the bar to dry the rubber lip, we can make movements in the form of an inverted “L”, to take advantage of the downward movement.

Once the cleaning of the glass is finished, we will have to revise it visually and locate (in the case that there are) imperfections in its finish, these imperfections will be corrected by the review with a dry cloth or chamois. The bathroom cleaning is essential in our home because it is one of the areas, along with the kitchen, where more germs and bacteria can accumulate. Being a wet area should be ventilated as much as possible, thus avoid the generation of these germs.

Sanitary

One of the elements that abound most in the bathrooms are the white enamel toilets. This material is very practical to clean and, being a very porous surface, we can maintain it easily, without great efforts. However, over the years, that enamel may start to yellow and it is hard to return the original white. To clean it you can use a mixture of salt and turpentine, applying it with a sponge or cloth gently. Leave on for a few minutes and then rinse with hot water and soap, then with cold water.

When the toilet is yellowing in its deep part, you can pour the contents of a can of cola (or two if the dirt is very marked) and leave for several hours, and even overnight. Then rinse with water, using the brush to descale the dirt. To remove the remains of lime adhering to the toilet bowl, do the same operation but instead of using a cola drink, use white vinegar. The results are amazing and it is an easy, fast and cheap way of cleaning.

Lime can also affect the faucets and the shower head. For cleaning, you can use a mixture of hot water and vinegar. Dip the artichoke in this mixture, let it act for a while and then rinse with plenty of water. You can do the same with the taps by unscrewing the end filter and applying the same treatment. The hot water is usually enough to remove soap residue from any surface. In the case of the bath or shower, avoid using abrasive products and bleach, as you will spoil the enamel. Use mild cleansers on a regular basis and you will not have to use other types of stronger products.

Mirrors

You should always clean the frame of the mirrors first, to avoid splashes from staining the glass when you clean it. To clean the glass a mixture of water and vinegar can be effective, but you can also spray a mixture of one litre of water, a cup of alcohol and another of ammonia. Try rubbing the mirror with a rag that does not release lint, although the best thing in this regard is newspaper or kitchen paper.

Tiles and tiles

The hot water and the vinegar are again good allies for cleaning the tiles and tiles in the bathroom. Rub with that mixture and then rinse with water and let it dry. Another option is to use ammonia, which also gives good results, or rub with a piece of lemon directly on the surface, leave to act and then rinse with water and dry. Tub and sink joints can become mouldy due to excess moisture in the bathroom. If we clean frequently applying with a brush a mixture of hot water with bleach in equal parts, we will keep the mould at bay. The mixture of water and vinegar can also be effective.

Safety: Always follow the instructions for use indicated by the manufacturer of cleaning products. Take precautions to avoid accidents such as the use of gloves. Avoid splashes on the skin. If you do not want to do it, in Maintenance Giner and Mira we can help you. We are leaders in maintenance and cleaning. Contact us or click here and we will find the most suitable solution for you. Have you found these tips interesting? We await your comments and if you want you can share it on your social networks so your friends can also enjoy these tips.

Why use Connect Cleaners

COMFORT AND SPEED

  • Find in a simple and safe way
  • Save time and money in the search
  • Forget about buying cleaning products
  • Optimize the professional’s time

GUARANTEE AND SECURITY

  • 100% compliance guarantee
  • You can make changes online
  • Trusted professionals in your city

Frosted Crystals by Connect Cleaners:

For those crystals whose surface is not smooth to the touch but they present a rough touch, we will not use the rubber lip since not adhering completely to the glass would leave it fogged. This type of glass is convenient to clean by hand and with non-soapy products, we can use a wet microfiber cloth to finish with a dry one. As these crystals are not translucent, they are easier to clean since imperfections are not seen in the same way as in translucent ones.

Connect Cleaners have tried theoretically to explain the cleaning system of the Professional Glaziers, and we have also tried to substitute some of the professional tools for utensils that we normally have at home. Tell them that practice makes the teacher; even the first few times you are not perfect but based on practice you can match the result to a professional. So if you are looking for an amazing service the best deal is to look for Connect Cleaners.

All about the steel kerbing for food environments

The kerbing reduces the ingress of liquids and provides protection to existing walls and columns from the floor. Steel kerbing for food environments have been providing sterile floors to the sustenance and drink and pharmaceutical businesses since 1979. We comprehend these businesses back to front and we know about their operational and authoritative demands, which imply we can give their significant brands, add up to deck answers for suit. Over the most recent 40 years we have developed our piece of the overall industry through nature of workmanship, tender loving care and superb client benefit. We are the main clean ground surface contractual workers for the sustenance and drink industry.

Stainless Steel Kerbs – steel kerbing for food environments:

The top notch stainless steel kerbing for food environments supply and introduce are outlined and delivered particularly for the nourishment and drink industry. They are accessible up to 20 meters long and have a standard cross segment. Corners to dividers and columns are pre-framed in the industrial facility. Current processing plants demand the most astounding norms of cleanliness. Conventional tiled and gum floors are weakest at the time when they meet the divider. A stainless steel kerbing framework can offer effect protection together with the cleanliness norms required in these requesting conditions.

Steel kerbing for food environments frameworks offer a one of a kind stainless steel kerbing arrangement:

  • More grounded
  • More clean
  • Attractive
  • Enduring

Kerbs can be settled against existing dividers, or where the office is an extensive open space which is isolated into assembling territories, the kerbs go about as division. The kerbs are settled to the current floor or arranged substrate with steel jolts and dowel sticks and are then loaded with concrete. They can likewise be utilized to frame bunds inside which the ground surface is laid. Diverse deck frameworks and thicknesses can be laid either side of the kerb. All frameworks depend on one demonstrated profile. A special procedure offers longer lengths and straighter areas. Unattractive welds can be maintained a strategic distance from in straight and exact runs.

In nourishment industry, quality and clean guidelines are critical. Substantial movement, risky work conditions, wet floors, can make clean dividers and entryway sections is rapidly and vigorously harmed. Our kerbs are the perfect assurance for divider boards against trolleys, hand beds and forklifts. The Protection against water invasion, evading of the divider/floor intersection and the shirking of empty space gives water and microorganisms no progressions.

Kerbs utilized as a part of sustenance preparing conditions where cleanliness is a need ought to be built with materials that are compound , effect and water-safe. Polymer composite kerbs and plinths give an answer for the cleanliness challenges postured by kerbs made out of cement. Pre-assembled polymer composite kerb frameworks are made by blending polyester tars and quartz pulverizes with the surface and after that completed with a bacteriostatic and stun safe polyester gel coat surface. In the generation of these kerbs, a solid framework is made by embellishment together the polyester quartz mass with the polyester gel coat covering. The two materials have a similar substance structure (polyester), which makes a solid kerb that is anything but difficult to clean, water-and synthetic safe and repairable.

Master establishment of steel kerbing for food environments:

Introducing a modern floor effectively limits downtime, supplements wellbeing and security and builds efficiency. Here are six basics to consider which will guarantee you do it once and do it right.

  1. Continuously guarantee all parts of the activity are handled in the meantime – on numerous events the establishment is greater than the floor itself. You’ll have to consider the floor substrate — it may not be reasonable for the last wrap up, the life of the floor; seepage

— fluids/spills should be expelled from the generation territory for wellbeing reasons; bollards, boundaries or kerbs — securing hardware and individuals is an indispensable thought; and defensive divider covers — another vital component in a clean domain. You have to pick an organization that will enable you to look past the floor to complete and give free exhaustive guidance for the entire undertaking.

  1. Lost creation implies lost cash that much is self-evident. For any creation chief watching out on a line of machines planned particularly to expand productivity laying inert in light of building work is a disappointing sight, so limiting downtime ought to be incorporated with any undertaking. Demand that work on the venture is organized at ends of the week, bank occasions and amid planned shutdowns. This will make the slightest disturbance generation plans.
  2. Utilizing flooring specialists who have broad information of your industry division will pay profits. They will know the ground surface arrangements which best meet the specific needs of your business and will have the capacity to supply and introduce demonstrated items from the most put stock in organizations, guaranteeing an effective result for your task.

Steel kerbing for food environments is produced in 3 stages – Preparation, Laying, and Finishing. Our highly trained team is able to complete each stage quickly and efficiently, giving you the best quality kerbing on the market today.

Concrete kerbing

Preparation: Perparation is critical to how the finished kerbing will apear. For areas that are already grassed, the design is marked out on the grass using marking paint. The unwanted grass is then removed using the edge-prep machine. This machine enables us to remove grass to a consistent depth. The trench is then finish graded and checked for proper compaction of the native soil.

Concrete edging

Extrusion: Extrusion is where the kerbing begins to take shape. We mix our own concrete on-site with custom-blended sand designed by owner Tom Berry to give the best consistency and strength to the kerbing. The concrete is loaded into the extrusion machine to begin the extrusion process. Once the kerbing has been extruded, kerbing is smoothed with one of our proprietary trowls to prepare it for finishing and to ensure that the shape and slope are correct.

The sealer used protects the kerb from UV radiation and fading, as well as providing it with some protection from water. In food processes and industries, it is increasingly recommended to use detectable materials. Therefore, we are the best manufacturer worldwide to develop products whose combination of plastic and stainless steel, allows easy magnetic detection. In addition, thanks to these products it is possible to meet the requirements of a standard as common in this sector.

Why makeup the test with Sara Domi

The makeup test comes from the need, or better, from the anxiety of knowing how we are going to see the most special day of our life. We have not waited months for, in the end, to have a distaste for lack of planning or for thinking that the test was an unnecessary expense. That is what this post is dedicated to, to tell you why, from my experience as a makeup artist, the test will give you the certainty that at your wedding you will feel comfortable, calm and you will smile a lot because you feel happy.

Sara Domi does the magic! It’s no secret to anyone that a girlfriend’s makeup and hairstyle are not cheap. Sometimes we only see numbers, but behind those numbers, there must be a talent, a skill, a good service, a lot of patience and a touch of spark to guide with great love all the women who come to the studio with a ring they told yes. Is it necessary to do the makeup test? Many brides ask me. And they add: “It’s just that I do not have time”, “it’s out of my budget”, “I already know your job well”. My answer, for all, is: yes, it is necessary. Moreover, it should be mandatory do get done by Sara Dom.

The makeup test at Sara Domi allows you, in the first place, to know the person that will leave you beautiful that day, to know your attitude in front of you, something that I call feeling and that is not achieved with all people. That is necessary to know because not all make-up artists are for all brides. It’s something that you feel while we hold a conversation in which you tell me details of the wedding. For me the most important are: the time, the dress and the type of accessory you want. Tiara, natural flowers, crown. What do you dream? What do you like? What are the trends? How is your skin? How is your hair? What does Sara Domi recommend?

The test begins by Sara Domi . Approximately two hours, maybe more, perhaps less. What is this? What is it for? How long will it last? What if I cry? What if I am allergic to a product? What if I cannot stand false eyelashes? Questions that Sara Domi solves, as she creates the perfect makeup and the dreamy hairstyle! Another frequent question: how many hairstyles and make-ups do we try? It is not about trying everything we want; it would be a long and exhausting exercise. There is a limit. Women have clear ideas of what we like and that, definitely, we do not fit. If we do not like the hair collected, why try something just in case? I always ask for references, inspirational images because that’s how it’s easier to capture ideas and from there to make a proposal that approaches what they have in mind.

Now, if you are a girlfriend who does not know what she wants, it is better to try several options. Minimum: hair loose, semi-collected and collected. As for the makeup, we can change lip tones, delineate, put more or fewer tabs and rehearse. We start from the knowledge we have of us, of our tastes, although sometimes a small change that we never imagine makes the difference and can be very positive.

It seems important to you, right? If something you did not like the test, quiet, fortunately, is the test. Imagine it was the day of your marriage and you’re dissatisfied. As something you did not like, we changed it without anguish, without fear, without stress. If you tried something and changed your mind, there is no problem, everything has a solution.

There is a chance that you do not like makeup, hairstyle or make-up. Do not worry; you still have time to look for other options. The best one however is Sara Domi. Yes, because you must do the test, hopefully, two months before the wedding. If you are anxious and the subject of makeup and hairstyle disturbs you, Sara Domi advise you to do it even before and matter resolved. If you live outside the country and you only have the week before the wedding, remember that you chose for images, references and that the quieter you are, the better you will go. You have to trust and let go. What opinions to hear? For me, the most important is always the bride’s, which is her and not what others want her to be.

Now let’s change the scenario and let’s say that everything was positive. You loved what you saw in the test! What a joy, you know how you are going to stay that day, you are safe and you go to the fixed one. A tip: how about you schedule the pre-wedding photos for the day of the test? So you take advantage of makeup and hairstyle. We rehearse, we let go of our hair, we make waves and that’s it. Before booking a make-up artist, it is essential to look at the work of several professionals, ask for references and clarify any doubts you may have. Who to stay with? With which you feel more identified, with the one that fits your budget and your date, with which you look at your photos and you love them all.

The Sara Domi test gives you confidence and confidence. It gives you time to make adjustments. That day you have a thousand things to think about, many guests. How about one less worry? Doing these tests, you will see if the provider combs and makes up as you really want or if on the contrary, it does not convince you. If this is the case, do not think it has been a waste of money, in fact, it is the best money invested in the wedding. Can you imagine having gone badly combed and badly made up for not wanting to do a test? Find another provider and perform another test until you find the right one.